If you work in an office, go to college or stay at home, there are chances that there is a router around for the strong internet connection you are enjoying. The router is configured by the technician who sets it up and a password as desired by you is created. 192.168.0.1 is the default IP address of most routers when they just come in from the manufacturers. It is the common address for all IPv4 networks and is called what is known as the host address. Most popular names in the router industry set it as the standard IP address for all ADSL and wireless routers and modems.
The person setting up the router need to access this page through a web browser and enter the admin username and password which is usually mentioned on the router. A router assigns IP to all the connected devices. As a router starts assigning IP to all the devices, the first three numbers remain the same, i.e., 192.168.o.1 while the last one is unique to the connected device. It could be 192.168.0.124 on one device while 192.168.0.201 on another. Without the admin login, you will not be able to make any change and set the security of your router. You will also not be able to access the settings page. Hence, it becomes imperative to learn the methods of 192.168.0.1 login and move to the admin dashboard of your router.
What is The Role of 192.168.0.1 And Why is it So Popular?
There are many important uses of this IP address which we should know before proceeding. Some of them include knowing the data rate, fragment threshold, wireless blocking, Wi-Fi multicast to unicast, changing the authentication type, knowing the network SSID (Service Set Identifier).
How To Know Whether The Default Address is 192.168.0.1?
Simply type out ipconfig on the command prompt and scroll down to IPv4 address. The default gateway can be seen two lines below the IPv4 address. This address will give you access to the configuration set up and details on how the internet is being managed. Sometimes, it may happen that the default address shown is not 192.168.0.1 due to the presence of other routers in the vicinity of the concerned router. So, in this case, one of the routers would change its value to 192.168.o.1 so that there is no clash.
The IP address is assigned based on the default gateway address which can conflict if there are two routers in the same region. So, it may happen that the routers assign the same IP address to the different devices. This can create a problem in the functioning of the devices as they have been assigned the same address which is practically not possible. To prevent this problem, one can manually assign an IP address which would save the hassle.
How to Login To 192.168.0.1 Admin Dashboard?
Below are the steps which you should follow to access the page easily.
- Open the web browser in your computer and connect the router to your computer through a wired cable or Ethernet wire. If using a laptop, you can connect wirelessly.
- Move to the URL bar and type out http://192.168.0.1 and press enter.
- This will bring up the admin page and prompt for a username and a password.
- Most routers come with a default address and password which is mentioned at the back part of the label on the router. Enter the details.
- Once you have correctly filled in the credentials, press enter which will give you access to admin dashboard of the modem or router to which you are connected.
How To Setup up The 192.168.0.1 Router For The First Time?
Once you have successfully logged in, it is time to setup the router with your computer.
- Again connect the computer to the router wired or wirelessly if using a laptop.
- Open the web browser and type out the IP address 192.168.0.1 and hit enter.
- You will be moved to a login page where you need to enter the details to login. The default username and password are mentioned at the back of the router.
- Now, restart the router and set up your SSID name. This is the name with which your connection will be known as. It can be your name, your company name or any other name with which your internet connection will be visible.
- Setup a strong password which will prevent fraud users from intruding into your network. It can be set up by visiting the security settings. After you are done, click on “next”.
- To make sure that changes have been saved, reboot the router once.
- Search for the SSID on your device and connect it to the router using the security password you have set up.